MATLAB Interface
Module information  
Modules  BESA Research Basic or higher 
Version  BESA Research 6.1 or higher 
Contents
Introduction
BESA Research has menu items "Send to MATLAB..." at various locations that allow to send data as structures to MATLAB. After sending the data, BESA Research starts a MATLAB script that can be used to start further data analysis on the data structure. These scripts, located in the Scripts\Matlab folder in the BESA Research installation, can be edited by the user to perform further data analysis in MATLAB. For example, if "Send to MATLAB" is selected in the File Export Dialog, a data structure besa_channels
will be created. After filling the structure, the script besa_action_channels.m
will be started.
All the MATLAB export functions are batchable. Thus, a complete data analysis can be performed, in which BESA Research does the preprocessing, and passes the data on to MATLAB i.e. for a statistical analysis of the results.
An example for the application of the MATLAB interface is demonstrated in the BESA Research Tutorial. You can download this tutorial from our website.
Some MATLAB scripts that can be used in conjunction with the BESA Research MATLAB interface are also available on our website at https://www.besa.de/downloads/matlab/. You are invited to send your own scripts for data analysis or to submit any questions or feedback here: https://www.besa.de/support/supportpage/.
Important: Please follow the instructions in the Configuration section! Then read the How the interface works section to get started.
Configuration
In order for the BESAMATLAB interface to work, please follow the instructions below. If you start BESA Research, and the file menu does not display the "Send to MATLAB" item, the interface is not installed correctly!
MATLAB must be installed
For the next step (required for MATLAB versions 2009b and over):
 We need to know whether the 32bit or 64bit version of MATLAB is installed.
 We also need to know the path to the MATLAB installation (e.g. C:\Program Files\MATLAB\2009b\).
Setting PATH environment variable
For versions 2009b and over, make sure that the path to the Win32 or Win64 folder in the MATLAB installation to the PATH environment variable is defined:
 The path for MATLAB 2009b:
 The path for the 64bit version: C:\Program Files\MATLAB\R2009b\bin\win64
 The path for the 32bit version: C:\Program Files\MATLAB\R2009b\bin\win32
 Open the "System Properties" dialog by holding down the "Windows" key and pressing the "Pause" key at the same time (Windows logo key + Pause).
 In Windows 7, the key combination opens the "System Display". Click on the link "Change Settings".
 In Windows 8 and Windows 10, the key combination also opens the "System Display". Click on the link "Advanced system settings".
 Skip the step in this description, as you have already chosen the advanced settings.
 Select the "Advanced" tab in the "System Properties" dialog.
 Press the "Environment Variables..." button.
 Under "System variables" click on the "Path" variable, and then click the "Edit..." button.
 In the resulting dialog, enter a semicolon (;) at the end of the path string, and add the path after the semicolon.
 In Windows 10, click the "New" button in the resulting dialog and then add the path.
 Note that if you have multiple versions of MATLAB installed, the added path has to be prior to other MATLAB versions present in the system path.
 Click "OK" to close and save the path variable. Click "OK" to close the "System Properties" dialog. When using Windows Vista/7/8/10, you will also need to close the "Control Panel" window afterwards.
Additional configuration
ConfigureBesaMatlabInterface.exe
(Only required after a change of your MATLAB configuration after installation of BESA Research)
During the installation process of BESA Research, the program ConfigureBesaMatlabInterface.exe (or SetupBesaMatlabInterface.exe) in the BESA Research root folder (e.g.: C:\Program Files (x86)\BESA\Research_7_1) was executed.
Run this program as administrator again when your MATLAB configuration has changed, e.g. after updating your MATLAB version. In the dropdown list, select the MATLAB version that you are using.
In the dropdown list, select the MATLAB version that you are using.
This program performs two operations:
 It copies the appropriate interface dll file to the BESA Research root folder and renames it to "BesaMatlab.dll" (32bit version) or "BesaMatlab64.dll" (64bit version), and
 If you are using a 64bit version, it creates an entry in BESA.ini (e.g.: C:\Users\Public\Documents\BESA\Research_7_1) as follows:
[Matlab] Platform=64
BesaMatlab64Interface.exe
Note: This step is not needed from BESA Research 7.1 March 2021.
If the installed MATLAB is 64bit version, please run the program BesaMatlab64Interface.exe in the BESA Research root folder (e.g.: C:\Program Files (x86)\BESA\Research_7_1). If the MATLAB path is set properly, a program window as the screenshot below is shown up without an error message. After that please just close the window.
Updating the MATLAB Interface after MATLAB Upgrade
Sometimes, the BESA to MATLAB interface stops working after installation of new/additional MATLAB version on one computer. The reason is the registry change/corruption caused by the newly installed version. In order to correct this, one has to perform the following steps:
 Make sure that in the "Path" environment variable the path to the current MATLAB version exist and, in case of other MATLAB version are present, is first on a list.
 Make sure that the correct MATLAB interface dll (BesaMatlab.dll (32bit version) or BesaMatlab64.dll (64bit version)) is installed by starting the tool ConfigureBesaMatlabInterface.exe (or SetupBesaMatlabInterface.exe) and selecting the corresponding MATLAB version and architecture.
 Run CMD (Command Prompt) as administrator, and then execute the following command (registers MATLAB as a Component Object Model (COM) server).
matlab regserver
 Close the CMD window (there should be no error message).
 Sometimes if the MATLAB license is connected to a specific user account and the user account does not have administrator rights, it could be problematic to execute that command. In that case, change the corresponding account to an administrator account and then perform the actions again. After that the account could be made to regular user account again.
 Alternatively, you can also run the
UserRegMATLAB.p
(which can be downloaded here) function to manually register your MATLAB version as a COM Automation Server. To switch the version of MATLAB that is registered, simply run theUserRegMATLAB
command on the new version so that it becomes the new COM Automation Server.  Finally, since MATLAB 2020a to register COM server a following command can be executed directly form MATLAB:
comserver('register')
. This does not require administrator account
 Run CMD (Command Prompt) as NOT administrator, and then execute the following command (Manually create automation server: start MATLAB as a Component Object Model (COM) Automation server. MATLAB does not display the splash screen).
matlab automation
 Close the CMD and MATLAB Command Window (there should be no error message).
Testing
Start BESA Research and check if Send to MATLAB... is displayed in the File menu. If it is, the interface is set up correctly. Note that the item will be grayed if no file is open in BESA Research.
Test the MATLAB interface
 Open a data file, mark a short (e.g. 1 s) time range, and select File / Send to MATLAB... to open the Export Dialog.
 The MATLAB window should open, and BESA Research will display a progress bar.
 After the window closes, open the MATLAB window, and type
workspace
to open the workspace window, ordesktop
to open the standard MATLAB desktop.  Examine the
besa_channels
variable, which contains the data for the marked data segment.
Troubleshooting if the interface is not working after the above steps
If the File / Send to MATLAB... menu item is not shown, this means that either the path (the above step for Setting PATH environment variable) is not defined properly, or that the interface Dll (BesaMatlab.dll or BesaMatlab64.dll) is not compatible with the currently installed version of MATLAB.
If the path is correct, then please contact our support team here: https://www.besa.de/support/supportpage/, including the following information:
 Which MATLAB version are you using?
 Specify also if you are using the 32bit or 64bit version.
How the interface works
The interface
The interface uses libraries supplied by Matlab. Their descriptions can be found in Matlab Help under the keywords "Engine Library". The Matlab libraries are incorporated into the interface Dll (BesaMatlab.dll or BesaMatlab64.dll) that provides the interface between BESA Research and Matlab. As newer versions of Matlab are released, it may be necessary to generate new versions of the dll to match the new library versions.
Matlab automation window
On the first call to one of the Matlab routines, the Matlab Automation Window is opened. This is not the same as the window that is normally opened when Matlab is started directly in Windows (the window can also be opened by typing "Matlab /automation" from the command line). From the Automation Window one can run normal Matlab scripts. It is also possible to type "desktop
" in the Automation Window to open the standard Matlab desktop. All variables that have been sent from BESA Research are then visible there.
BESA Research "Send to MATLAB" commands and scripts
Send to MATLAB commands generate data structures that differ depending on the type of data that are sent. After each export the corresponding script is executed. They are available at the following locations in BESA Research:
 From the Main program window (File Menu), as part of the Export Dialog. Structure name besa_channels. Script name besa_action_channels.m.
 From the FFT analysis (File Menu). Structure name besa_fft. Script name besa_action_fft.m.
 From Combine Conditions (Run Scripts Tab), in the export of peaks and mean amplitudes. Structure name besa_peak. Script name besa_action_peak.m.
 From Source Analysis (File Menu), for exporting source waveforms (besa_sourcewaveforms), source models (besa_sourcemodel), data, residual and model waveforms (besa_sa_channels), and 3D images (besa_image). Script names besa_action_sourcewaveforms.m, besa_action_sourcemodel.m, besa_action_sa_channels.m, and besa_action_image.m.
 From TimeFrequency/Coherence Analysis (File Menu). Structure names besa_tfc, and besa_tfc_trials (for singletrial timefrequency data). Script names besa_action_tfc.m and besa_action_tfc_trials.m.
Some additional scripts are used for specific data types. For example, when exporting raw data, two scripts, besa_helper_channels_event.m (or besa_helper_channels_event_continousdata.m for 64bit) and besa_helper_channels_continuousdata.m are used to collect events from each data block and to combine the exported data blocks into a single matrix.
Command script path
When the commands are executed, BESA Research automatically executes an "addpath" command in Matlab to add the Scripts\MATLAB folder (in Windows 10 typically C:\Users\Public\Documents\BESA\Research_7_1\Scripts\MATLAB) and its firstlevel subfolders to the Matlab search path.
Units
Unless otherwise stated, distances are in meters, times are in seconds, and the headframe (fiducialbased) coordinate system is used.
Review  

Source Analysis  
Integration with MRI and fMRI  
Source Coherence  
Export  
MATLAB Interface 

Special Topics 